Fiber content measurement device
What is QC-CAMBOT®?
QC-CAMBOT® is a simple device designed to determine the steel fiber content of concrete prism. The amount is obtaine indirectly measuring the inductance of the prism on three orthogonal positions (x, y, z). The sum of these three values in linearly proportional to the total amount of steel fibers in the sample.
How is QC-CAMBOT® useful?
QC-CAMBOT® is a useful device for companies or research centers that use fiber-reinforced concrete or UHPC. Precasters can use it to control the fiber content of their mix, identifiying segregation or problems on its distribution. Pavers can use it easily to detect if the concrete has the content of steel fibers agreed with the provider. Users can also obtain the real steel fiber content of a prism submitted to a flexutal test to carry out an accurate inverse analysis. In summary, QC-CAMBOT® allows to know in detail the real fiber content in a cube avoiding the wash-out or other complex methodologies.
- Unlike other devices that are not yet in the market, it operates without needing to be plugged in.
- Its robust software requires only a smartphone to function.
- It delivers highly accurate results
- It's a lightweight device (total weight of 3.5 kg) that can be used everywhere.
- Each measurement takes less than 3 seconds to complete.
- It is CE-marked, ensuring compliance with EU safety and quality standards.
Measurement in Hardened State
Connect the USB-C cable to your smartphone (with the free App already installed).
Enter the conversion factor to obtain the results as a percentage on fibers in volume. To obtain the results in inductance (ηH), leave this field blank.
Follow steps 1 and 2 and then…
B. Place the lid and secure it with the two safety bands so you can rotate the vessel without the material spilling out.
Then follow the steps 3 to 5 and Clean the testing vessel thoroughly to prepare it for the next use.
QC-CAMBOT®
Doesn’t need to be plugged in.
Weight of 3.5 kg
Only one connection (USB-C)
Just 3.2 seconds /measurement
Quick startup of the smartphone free app used to measure
CE marked
Delivery in 4 weeks
Other devices not yet in the market
Require to be plugged-in
Weight of 9 kg
Seven connections required
7 seconds /measurement
Slow switch-on of the software required
Not CE marked
Unknown
We have sold…
QC-CAMBOT® is produced by RDC, engineering company expert in special concretes. You can request your QC-CAMBOT® writing a mail to ecamacho@rdconcrete.com, calling to +34 669 08 50 20 or filling out the form below .
The device is sent to the client a maximum of 4 weeks after formal order. The product includes a concrete prism to verify the proper functioning of the device, and the conversion factors of the most frequent fiber typologies. RDC can also obtain the factors for any specific fiber used by the client.
